Cable distances

Below is the distance that various cable and fiber offers

Name	Medium	Specified distance
1000BASE-CX	Balanced copper cabling	25 meters
1000BASE-SX	Multi-mode fiber using 850 nm wavelength	550 meters
1000BASE-LX	Multi-mode fiber	550 meters
1000BASE-LX	Single-mode fiber	5 km
1000BASE-LH	Single-mode fiber using 1310 nm wavelength	10 km
1000BASE-LH	Multi-mode fiber using 1310 nm wavelength	550 meters
1000BASE-ZX	Single-mode fiber at 1550 nm wavelength	~ 70 km
1000BASE-LX10	Single-mode fiber using 1310 nm wavelength	10 km
1000BASE-BX10	Single-mode fiber, over single-strand fiber: 1490 nm downstream 1310 nm upstream	10 km
1000BASE-T	Twisted-pair cabling (CAT-5, CAT5e, CAT-6, or CAT-7)	100 meters
1000BASE-TX	Twisted-pair cabling (CAT-6, CAT-7)	100 meters

This information is listed on the internet in numerous places but received the info from Joseph Curtis

For more information or help, check these pages out

Contact Email: Support@upgradenrepair.com

DISCLAIMER:UpgradeNRepair (UNR), the owner, and any representatives of UpgradeNRepair (UNR) is not liable for any data loss or hardware failure because of the following procedure. The Information provided is a guide to assist the customer with an issue with their system or software. The procedures offered here may or may not harm your files. Even procedures that are not designed to harm files, can harm files, depending on the issue with the system. Because there is too many unknowns, UpgradeNRepair is unable to guarantee the safety of the files. Customer is responsible for their data and their actions. Before following the directions on this page and the pages these links are linked to, any data the customer does not want to lose will have to be saved. Saving the data is the sole responsibility of the customer. Some or all of the following procedures or information may not apply to your situation.