Creating a boot disk in Windows XP

If you have a 3½ floppy drive, you can create a boot floppy in windows. To do this, follow these steps

Open up My Computer

Put a floppy in the 3 1/2 drive
Right-click 3½ floppy
Click on Format

Check Create an MS-DOS startup disk

Click Start

Download the DOS files
Copy the DOS files to the floppy drive
Download Delpart to the floppy

Contact Email: Support@upgradenrepair.com

DISCLAIMER:UpgradeNRepair (UNR), the owner, and any representatives of UpgradeNRepair (UNR) is not liable for any data loss or hardware failure because of the following procedure. The Information provided is a guide to assist the customer with an issue with their system or software. The procedures offered here may or may not harm your files. Even procedures that are not designed to harm files, can harm files, depending on the issue with the system. Because there is too many unknowns, UpgradeNRepair is unable to guarantee the safety of the files. Customer is responsible for their data and their actions. Before following the directions on this page and the pages these links are linked to, any data the customer does not want to lose will have to be saved. Saving the data is the sole responsibility of the customer. Some or all of the following procedures or information may not apply to your situation.