Download the firmware

To Download the firmware of the router do the following

Open Internet Explorer
Type http://www.linksys.com in the address bar

Press Enter
Click Support

Enter the model number

Click Go

Click get downloads

Select your version (important)

On the left hand side is the firmware

If this version is newer than your version of the firmware, click Download
Choose a location that you want to download the file to (be sure to write down or remember where you downloaded it to)

Contact Email: Support@upgradenrepair.com

DISCLAIMER:UpgradeNRepair (UNR), the owner, and any representatives of UpgradeNRepair (UNR) is not liable for any data loss or hardware failure because of the following procedure. The Information provided is a guide to assist the customer with an issue with their system or software. The procedures offered here may or may not harm your files. Even procedures that are not designed to harm files, can harm files, depending on the issue with the system. Because there is too many unknowns, UpgradeNRepair is unable to guarantee the safety of the files. Customer is responsible for their data and their actions. Before following the directions on this page and the pages these links are linked to, any data the customer does not want to lose will have to be saved. Saving the data is the sole responsibility of the customer. Some or all of the following procedures or information may not apply to your situation.