How to log on to the router

If you need to know how to log on to the router, follow these steps (click on the hyperlink for assistance with that step)

You will need to know the gateway address
Open Internet Explorer
Type in the gateway address (this example address may be different than yours)

Press Enter
Type in the username and password (the username is either blank, administrator or admin by default. The password is either admin, or administrator by default. Check with Linksys's website for this information.)

Click OK

Contact Email: Support@upgradenrepair.com

DISCLAIMER:UpgradeNRepair (UNR), the owner, and any representatives of UpgradeNRepair (UNR) is not liable for any data loss or hardware failure because of the following procedure. The Information provided is a guide to assist the customer with an issue with their system or software. The procedures offered here may or may not harm your files. Even procedures that are not designed to harm files, can harm files, depending on the issue with the system. Because there is too many unknowns, UpgradeNRepair is unable to guarantee the safety of the files. Customer is responsible for their data and their actions. Before following the directions on this page and the pages these links are linked to, any data the customer does not want to lose will have to be saved. Saving the data is the sole responsibility of the customer. Some or all of the following procedures or information may not apply to your situation.