Data Execution Prevention (DEP)

A detailed description of the Data Execution Prevention (DEP) feature in Windows XP Service Pack 2, Windows XP Tablet PC Edition 2005, and Windows Server 2003

This article is from Microsoft. Article ID 875352 written February 15, 2006

On This Page

SUMMARY
INTRODUCTION
MORE INFORMATION
MORE INFORMATION
APPLIES TO

SUMMARY

Data Execution Prevention (DEP) is a set of hardware and software technologies that perform additional checks on memory to help prevent malicious code from running on a system. In Microsoft Windows XP Service Pack 2 (SP2) and Microsoft Windows XP Tablet PC Edition 2005, DEP is enforced by hardware and by software.

The primary benefit of DEP is to help prevent code execution from data pages. Typically, code is not executed from the default heap and the stack. Hardware-enforced DEP detects code that is running from these locations and raises an exception when execution occurs. Software-enforced DEP can help prevent malicious code from taking advantage of exception-handling mechanisms in Windows.

INTRODUCTION

This article describes the DEP feature in Windows XP SP2 and in Microsoft Windows Server 2003 with Service Pack 1 (SP1) and discusses the following topics:

Hardware-enforced DEP
Software-enforced DEP
Benefits
System-wide configuration of DEP
Per-program DEP configuration

Return to Top

MORE INFORMATION

Hardware-enforced DEP

Hardware-enforced DEP marks all memory locations in a process as non-executable unless the location explicitly contains executable code. A class of attacks exists that tries to insert and run code from non-executable memory locations. DEP helps prevent these attacks by intercepting them and raising an exception.

Hardware-enforced DEP relies on processor hardware to mark memory with an attribute that indicates that code should not be executed from that memory. DEP functions on a per-virtual memory page basis, and DEP typically changes a bit in the page table entry (PTE) to mark the memory page.

Processor architecture determines how DEP is implemented in hardware and how DEP marks the virtual memory page. However, processors that support hardware-enforced DEP can raise an exception when code is executed from a page that is marked with the appropriate attribute set.

Advanced Micro Devices (AMD) and Intel have defined and shipped Windows-compatible architectures that are compatible with DEP.

Beginning with Windows XP SP2, the 32-bit version of Windows uses one of the following:

The no-execute pate-protection (NX) processor feature as defined by AMD
The Execute Disable Bit (XD) feature as defined by Intel.

Return to Top

To use these processor features, the processor must be running in Physical Address Extension (PAE) mode. However, Windows will automatically enable PAE mode to support DEP. Users do not have to separately enable PAE by using the /PAE boot switch.

Note Because 64-bit kernels are Address Windowing Extensions (AWE) aware, there is not a separate PAE kernel in 64-bit versions of Windows.
For more information about PAE and AWE in Windows Server 2003, click the following article number to view the article in the Microsoft Knowledge Base:

283037 (http://support.microsoft.com/kb/283037/) Large memory support is available in Windows Server 2003 and in Windows 2000

Return to Top

Software-enforced DEP

An additional set of Data Execution Prevention security checks have been added to Windows XP SP2. These checks, known as software-enforced DEP, are designed to block malicious code that takes advantage of exception-handling mechanisms in Windows. Software-enforced DEP runs on any processor that can run Windows XP SP2. By default, software-enforced DEP helps protect only limited system binaries, regardless of the hardware-enforced DEP capabilities of the processor.

Return to Top

Benefits

The primary benefit of DEP is that it helps prevent code execution from data pages, such as the default heap pages, various stack pages, and memory pool pages. Typically, code is not executed from the default heap and the stack. Hardware-enforced DEP detects code that is running from these locations and raises an exception when execution occurs. If the exception is unhandled, the process will be stopped. Execution of code from protected memory in kernel mode causes a Stop error.

DEP can help block a class of security intrusions. Specifically, DEP can help block a malicious program in which a virus or other type of attack has injected a process with additional code and then tries to run the injected code. On a system with DEP, execution of the injected code causes an exception. Software-enforced DEP can help block programs that take advantage of exception-handling mechanisms in Windows.

Return to Top

System-wide configuration of DEP

DEP configuration for the system is controlled through switches in the Boot.ini file. If you are logged on as an administrator, you can now easily configure DEP settings by using the System dialog box in Control Panel.

Windows supports four system-wide configurations for both hardware-enforced and software-enforced DEP.

Configuration	Description
OptIn	This setting is the default configuration. On systems with processors that can implement hardware-enforced DEP, DEP is enabled by default for limited system binaries and programs that "opt-in." With this option, only Windows system binaries are covered by DEP by default.
OptOut	DEP is enabled by default for all processes. You can manually create a list of specific programs that do not have DEP applied by using the System dialog box in Control Panel. Information technology (IT) professionals can use the Application Compatibility Toolkit to "opt-out" one or more programs from DEP protection. System compatibility fixes, or shims, for DEP do take effect.
AlwaysOn	This setting provides full DEP coverage for the whole system. All processes always run with DEP applied. The exceptions list to exempt specific programs from DEP protection is not available. System compatibility fixes for DEP do not take effect. Programs that have been opted-out by using the Application Compatibility Toolkit run with DEP applied.
AlwaysOff	This setting does not provide any DEP coverage for any part of the system, regardless of hardware DEP support. The processor does not run in PAE mode unless the /PAE option is present in the Boot.ini file.

Hardware-enforced and software-enforced DEP are configured in the same manner. If the system-wide DEP policy is set to OptIn, the same Windows core binaries and programs will be protected by both hardware-enforced and software-enforced DEP. If the system cannot use hardware-enforced DEP, the Windows core binaries and programs will be protected only by software-enforced DEP.

Similarly, if the system-wide DEP policy is set to OptOut, programs that have been exempted from DEP protection will be exempted from both hardware-enforced and software-enforced DEP.

The Boot.ini file settings are as follows:

/noexecute=policy_level

Note policy_level is defined as AlwaysOn, AlwaysOff, OptIn, or OptOut.

Existing /noexecute settings in the Boot.ini file are not changed when Windows XP SP2 is installed. These settings are also not changed if a Windows operating system image is moved across computers with or without hardware-enforced DEP support.

During installation of Windows XP SP2 and Windows Server 2003 SP1 or later versions, the OptIn policy level is enabled by default unless a different policy level is specified in an unattended installation. If the /noexecute=policy_level setting is not present in the Boot.ini file for a version of Windows that supports DEP, the behavior is the same as if the /noexecute=OptIn setting was included.

If you are logged on as an administrator, you can manually configure DEP to switch between the OptIn and OptOut policies by using the Data Execution Prevention tab in System Properties. The following procedure describes how to manually configure DEP on the computer:

Access Run or Search window
Type sysdm.cpl
Click on OK