How to enable Flash in Windows 8

How to verify Flash in Windows 8 is enabled

Flash is built into Internet Explorer in Windows 8

To enable Flash in Internet Explorer, do the following

Acccess Add-ons (Click the hyperlink for instructions)
Select Toolbars and Extensions

On the right look for Shockwave Flash Object under Microsoft Windows 3rd party Componet

On Status it will say Enabled or Disabled.

If you want to change it, right click on Disabled or Enabled and select the option you want.

Adobe says you will just have to restart Internet Explorer but I have found that the change will not take affect till you reboot the computer.

Contact Email: Support@upgradenrepair.com

DISCLAIMER:UpgradeNRepair (UNR), the owner, and any representatives of UpgradeNRepair (UNR) is not liable for any data loss or hardware failure because of the following procedure. The Information provided is a guide to assist the customer with an issue with their system or software. The procedures offered here may or may not harm your files. Even procedures that are not designed to harm files, can harm files, depending on the issue with the system. Because there is too many unknowns, UpgradeNRepair is unable to guarantee the safety of the files. Customer is responsible for their data and their actions. Before following the directions on this page and the pages these links are linked to, any data the customer does not want to lose will have to be saved. Saving the data is the sole responsibility of the customer. Some or all of the following procedures or information may not apply to your situation.