Install a local printer

There is different methods of installing a printer but this is a generic instructions that may apply enough to your install that you can use it.

Access the printer driver by either having the CD or download the driver from the manufacturer's website
There is two methods of connection
1. Via parallel cable
  1. You will need to plug the parallel cable in before hand while the computer is off. Do not connect it while the system is on.
2. Via USB cable
  1. You can plug the USB cable in while the system is on.
If this is a new printer, it should have instructions to install the printer.
If you do not have the instructions, follow the steps below
Connect the power cord to the printer
Connect the power cord to an outlet
Remove all tape from the printer
Examinee it good, it is easy to overlook a piece of tape
Install the ink
Add paper
There is two different scenarios
1. Some printers require the USB cable to be disconnected during the install of the printer software.
  1. On this type of install, the software will instruct you to connect the USB cable when it is time.
2. Other printers require the USB cable to be connected before the install.
  1. The software will instruct you to connect the cable.
Follow the instructions to finish the install.

Contact Email: Support@upgradenrepair.com

DISCLAIMER:UpgradeNRepair (UNR), the owner, and any representatives of UpgradeNRepair (UNR) is not liable for any data loss or hardware failure because of the following procedure. The Information provided is a guide to assist the customer with an issue with their system or software. The procedures offered here may or may not harm your files. Even procedures that are not designed to harm files, can harm files, depending on the issue with the system. Because there is too many unknowns, UpgradeNRepair is unable to guarantee the safety of the files. Customer is responsible for their data and their actions. Before following the directions on this page and the pages these links are linked to, any data the customer does not want to lose will have to be saved. Saving the data is the sole responsibility of the customer. Some or all of the following procedures or information may not apply to your situation.