Run menu

Windows 7

If Run is not on the Start Menu, follow these steps

Right-click Orb
Click on Properties
Select the Start Menu tab

Click Customize

Scroll through the list until you find the run command

Place a check on the run command
Click OK twice

Note: If run is not showing up on the Start menu but the run is checked. Follow the steps above and uncheck it, then click OK. After you close it out, repeat the steps above to put a check back in it.

Contact Email: Support@upgradenrepair.com

DISCLAIMER:UpgradeNRepair (UNR), the owner, and any representatives of UpgradeNRepair (UNR) is not liable for any data loss or hardware failure because of the following procedure. The Information provided is a guide to assist the customer with an issue with their system or software. The procedures offered here may or may not harm your files. Even procedures that are not designed to harm files, can harm files, depending on the issue with the system. Because there is too many unknowns, UpgradeNRepair is unable to guarantee the safety of the files. Customer is responsible for their data and their actions. Before following the directions on this page and the pages these links are linked to, any data the customer does not want to lose will have to be saved. Saving the data is the sole responsibility of the customer. Some or all of the following procedures or information may not apply to your situation.