Command prompt

Windows 98

Click on the hyperlink for instructions for that step or on for a picture of that step.

Make sure system is turned off.
Then turn system back on.
Start hitting function key F8 key over and over again till you get the boot menu.

Press number 5 key

Press the Enter key.

If you need help with DOS commands click here.

Note: if you get a message about the keyboard, turn the system off and then back on. This time wait 3 seconds before hitting the function key. Some systems have to initialize the keyboard when the system turns on. If you hit the key too soon you will get a keyboard error.

Contact Email: Support@upgradenrepair.com

DISCLAIMER:UpgradeNRepair (UNR), the owner, and any representatives of UpgradeNRepair (UNR) is not liable for any data loss or hardware failure because of the following procedure. The Information provided is a guide to assist the customer with an issue with their system or software. The procedures offered here may or may not harm your files. Even procedures that are not designed to harm files, can harm files, depending on the issue with the system. Because there is too many unknowns, UpgradeNRepair is unable to guarantee the safety of the files. Customer is responsible for their data and their actions. Before following the directions on this page and the pages these links are linked to, any data the customer does not want to lose will have to be saved. Saving the data is the sole responsibility of the customer. Some or all of the following procedures or information may not apply to your situation.