Access Windows Features in Vista

Access Windows Features

To access Windows features, Click your operating system

Windows Vista
Windows 7

Windows Vista

Go to control panel (This link will open in a different window)
Double-click Programs and Features

Click on Turn Windows Features on or off

You will now see the following

To enable a feature, put a check in the box and click OK. To disable a feature, uncheck the item.

Windows 7

Go to control panel (This link will open in a different window)
Double-click Programs and Features

Click on Turn Windows Features on or off

You will now see the following

To enable a feature, put a check in the box and click OK. To disable a feature, uncheck the item.

Contact Email: Support@upgradenrepair.com

DISCLAIMER:UpgradeNRepair (UNR), the owner, and any representatives of UpgradeNRepair (UNR) is not liable for any data loss or hardware failure because of the following procedure. The Information provided is a guide to assist the customer with an issue with their system or software. The procedures offered here may or may not harm your files. Even procedures that are not designed to harm files, can harm files, depending on the issue with the system. Because there is too many unknowns, UpgradeNRepair is unable to guarantee the safety of the files. Customer is responsible for their data and their actions. Before following the directions on this page and the pages these links are linked to, any data the customer does not want to lose will have to be saved. Saving the data is the sole responsibility of the customer. Some or all of the following procedures or information may not apply to your situation.