Dial up Connection

Windows 7

To setup a wireless connection on the computer do the following.

NOTE: I do not have a dial up modem so cannot verify each step as being accurate but the procedure should be close

Go to Control Panel (This link will open in a different window)
Click on Network and Sharing Center

Click Set up a wireless, broadband, dial-up

Click Connect to the Internet

Click Set up a new connection anyway (you may not see this screen)

Choose your dial-up modem (I don't have one so I can't show it here)

Choose Dial-up

Enter your information. Be sure to select Allow other people to use this connection

Dial up should be configured.

Contact Email: Support@upgradenrepair.com

DISCLAIMER:UpgradeNRepair (UNR), the owner, and any representatives of UpgradeNRepair (UNR) is not liable for any data loss or hardware failure because of the following procedure. The Information provided is a guide to assist the customer with an issue with their system or software. The procedures offered here may or may not harm your files. Even procedures that are not designed to harm files, can harm files, depending on the issue with the system. Because there is too many unknowns, UpgradeNRepair is unable to guarantee the safety of the files. Customer is responsible for their data and their actions. Before following the directions on this page and the pages these links are linked to, any data the customer does not want to lose will have to be saved. Saving the data is the sole responsibility of the customer. Some or all of the following procedures or information may not apply to your situation.