Wireless Zero Configuration

To enable this service, do the following (Click on the hyperlink for instructions on that step)

Open Services (This link will open in a different window)
Scroll to the bottom of the list

Double-click Wireless Zero Configuration
Make sure Startup type is set to Automatic

If the service status says anything else besides started, Click on Start

Click on OK

Close services

For more information on the different items listed in Services, click here

Contact Email: Support@upgradenrepair.com

DISCLAIMER:UpgradeNRepair (UNR), the owner, and any representatives of UpgradeNRepair (UNR) is not liable for any data loss or hardware failure because of the following procedure. The Information provided is a guide to assist the customer with an issue with their system or software. The procedures offered here may or may not harm your files. Even procedures that are not designed to harm files, can harm files, depending on the issue with the system. Because there is too many unknowns, UpgradeNRepair is unable to guarantee the safety of the files. Customer is responsible for their data and their actions. Before following the directions on this page and the pages these links are linked to, any data the customer does not want to lose will have to be saved. Saving the data is the sole responsibility of the customer. Some or all of the following procedures or information may not apply to your situation.