mountvol

Updated: January 21, 2005

Creates, deletes, or lists a volume mount point. Mountvol is a way to link volumes without requiring a drive letter.

Syntax

mountvol [Drive:]Path VolumeName

mountvol [Drive:]Path/d

mountvol [Drive:]Path/l

mountvol [Drive:]Path/p

mountvol/r

mountvol/n

mountvol/e

mountvolDrive:/s

Parameters

[ Drive:]Path

Specifies the existing NTFS directory folder where the mount point will reside.

VolumeName

Specifies the volume name that is the target of the mount point. The volume name is of the form \\?\Volume{GUID}\, where {GUID} is a globally unique identifier (GUID) (for example, \\?\Volume\{2eca078d-5cbc-43d3-aff8-7e8511f60d0e}\).

Removes the volume mount point from the specified folder.

Lists the mounted volume name for the specified folder.

Removes the volume mount point from the specified directory, dismounts the basic volume, and takes the basic volume offline, making it unmountable. If other processes are using the volume, mountvol closes any open handles before dismounting the volume. Volumes dismounted using /p are listed in the volumes list as NOT MOUNTED UNTIL A VOLUME MOUNT POINT IS CREATED. If the volume has more than one mount point, use /d to remove the additional mount points before using /p. You can make the basic volume mountable again by assigning a volume mount point.

Removes volume mount point directories and registry settings for volumes that are no longer in the system. This prevents volumes that were previously in the system from being automatically mounted and given their former volume mount point(s) when added back to the system.

Disables automatic mounting of new basic volumes. New volumes are not mounted automatically when added to the system.

Re-enables automatic mounting of new basic volumes.

Itanium-based computers only. Mounts the EFI system partition on the specified drive.

Displays help at the command prompt.

Remarks

If you are running out of drive letters to use, mount your local volumes with no drive letters.
If you need to expand your volume space without reformatting or replacing a hard drive, you can add a mount path to another volume.
The benefit is that if you use one volume with several mount paths, you can access all local volumes using a single drive letter (such as C:). You need not remember which volume corresponds to which drive letter, although you can mount local volumes and still have them assigned to drive letters.

Formatting legend

Format	Meaning
Italic	Information that the user must supply
Bold	Elements that the user must type exactly as shown
Ellipsis (...)	Parameter that can be repeated several times in a command line
Between brackets ([])	Optional items
Between braces ({}); choices separated by pipe (\|). Example: {even\|odd}	Set of choices from which the user must choose only one
Courier font	Code or program output

Contact Email: Support@upgradenrepair.com

DISCLAIMER:UpgradeNRepair (UNR), the owner, and any representatives of UpgradeNRepair (UNR) is not liable for any data loss or hardware failure because of the following procedure. The Information provided is a guide to assist the customer with an issue with their system or software. The procedures offered here may or may not harm your files. Even procedures that are not designed to harm files, can harm files, depending on the issue with the system. Because there is too many unknowns, UpgradeNRepair is unable to guarantee the safety of the files. Customer is responsible for their data and their actions. Before following the directions on this page and the pages these links are linked to, any data the customer does not want to lose will have to be saved. Saving the data is the sole responsibility of the customer. Some or all of the following procedures or information may not apply to your situation.