Floppy drive cable

The floppy data cable connects the floppy drive to the motherboard. This cable looks just like the cable for the primary and secondary IDE controllers. The only difference is it is smaller in width. The cable cannot be connected to the primary and secondary IDE controllers by mistake because it is not as wide.

The power connector connects the power connector from the power supply to the Floppy drive.

Contact Email: Support@upgradenrepair.com

DISCLAIMER:UpgradeNRepair (UNR), the owner, and any representatives of UpgradeNRepair (UNR) is not liable for any data loss or hardware failure because of the following procedure. The Information provided is a guide to assist the customer with an issue with their system or software. The procedures offered here may or may not harm your files. Even procedures that are not designed to harm files, can harm files, depending on the issue with the system. Because there is too many unknowns, UpgradeNRepair is unable to guarantee the safety of the files. Customer is responsible for their data and their actions. Before following the directions on this page and the pages these links are linked to, any data the customer does not want to lose will have to be saved. Saving the data is the sole responsibility of the customer. Some or all of the following procedures or information may not apply to your situation.