add an old hard drive as a secondary drive

If you want to add an older hard drive into your new system, you may or may not be able to add it. Here is information on this

Some systems have only one connector for a hard drive. Does yours have a spot to connect the second drive to?
If the hard drive is a PATA or an IDE drive, does the system you want to add the drive to have connections for a PATA or IDE drive? For information on hard drive identifications, click here.

If you verified the above meets the specifications of the drive you have, then you can connect the drive as a secondary drive.

For instructions on installing the drive, use these directions.

Contact Email: Support@upgradenrepair.com

DISCLAIMER:UpgradeNRepair (UNR), the owner, and any representatives of UpgradeNRepair (UNR) is not liable for any data loss or hardware failure because of the following procedure. The Information provided is a guide to assist the customer with an issue with their system or software. The procedures offered here may or may not harm your files. Even procedures that are not designed to harm files, can harm files, depending on the issue with the system. Because there is too many unknowns, UpgradeNRepair is unable to guarantee the safety of the files. Customer is responsible for their data and their actions. Before following the directions on this page and the pages these links are linked to, any data the customer does not want to lose will have to be saved. Saving the data is the sole responsibility of the customer. Some or all of the following procedures or information may not apply to your situation.