Reset Modem

Use the Reset button, on the back of the Telephony Gateway, to reset the modem and perform initialization as if you power cycled the unit. Your may need to reset the Telephony Gateway if you are having problems connecting to the Internet. Using this button will be rare.

Use a pointed non-metallic object to press this button. The photo above shows the location of the Reset button. The Reset button is recessed to prevent accidental resets.

To reset the Router to Factory Defaults

To reset the router to factory defaults, press and hold the Reset button on the back of the Telephony Gateway fro more than fifteen seconds. This restores the wireless setup configuration and router configuration parameters to the factory defaults. You may need to do this if a misconfiguration has locked out all access.

Warning!!!

This will put the modem back to its default settings. Any settings that you have setup will be lost and will have to be re-entered

Contact Email: Support@upgradenrepair.com

DISCLAIMER:UpgradeNRepair (UNR), the owner, and any representatives of UpgradeNRepair (UNR) is not liable for any data loss or hardware failure because of the following procedure. The Information provided is a guide to assist the customer with an issue with their system or software. The procedures offered here may or may not harm your files. Even procedures that are not designed to harm files, can harm files, depending on the issue with the system. Because there is too many unknowns, UpgradeNRepair is unable to guarantee the safety of the files. Customer is responsible for their data and their actions. Before following the directions on this page and the pages these links are linked to, any data the customer does not want to lose will have to be saved. Saving the data is the sole responsibility of the customer. Some or all of the following procedures or information may not apply to your situation.