How to setup send and receive

If you want to change or setup send and receive settings, do the following

Open Outlook
Click on Tools
Click on Options
Click on the Tab Mail Setup
Click on Send/Receive button
If you want Outlook to automatically check for new mail, Put a check in the box for Schedule an automatic send/receive every 5 minutes. If you want it to check more frequently, change the 5 to the desired time.

Contact Email: Support@upgradenrepair.com

DISCLAIMER:UpgradeNRepair (UNR), the owner, and any representatives of UpgradeNRepair (UNR) is not liable for any data loss or hardware failure because of the following procedure. The Information provided is a guide to assist the customer with an issue with their system or software. The procedures offered here may or may not harm your files. Even procedures that are not designed to harm files, can harm files, depending on the issue with the system. Because there is too many unknowns, UpgradeNRepair is unable to guarantee the safety of the files. Customer is responsible for their data and their actions. Before following the directions on this page and the pages these links are linked to, any data the customer does not want to lose will have to be saved. Saving the data is the sole responsibility of the customer. Some or all of the following procedures or information may not apply to your situation.