How to boot to Safe Mode with Networking

Windows Vista and newer

To access do the following

Manually boot to Safe Mode with Networking

Turn the computer on
After bios screen start hitting F8 key(If you see the Windows splash screen, you have missed the startup menu. If that happens, turn the computer off and try again)

Push the down arrow key to highlight Safe Mode with Networking

Press Enter

Use Utility to boot to Safe mode with Networking

Download the boot utility

Double-click Bootsafe.exe

Choose Safe mode - Minimal

Click Reboot

Contact Email: Support@upgradenrepair.com

DISCLAIMER:UpgradeNRepair (UNR), the owner, and any representatives of UpgradeNRepair (UNR) is not liable for any data loss or hardware failure because of the following procedure. The Information provided is a guide to assist the customer with an issue with their system or software. The procedures offered here may or may not harm your files. Even procedures that are not designed to harm files, can harm files, depending on the issue with the system. Because there is too many unknowns, UpgradeNRepair is unable to guarantee the safety of the files. Customer is responsible for their data and their actions. Before following the directions on this page and the pages these links are linked to, any data the customer does not want to lose will have to be saved. Saving the data is the sole responsibility of the customer. Some or all of the following procedures or information may not apply to your situation.