Using a USB flash drive

Home
About
How to use software
How to use Windows
Computer Issues
Computer parts info and install instructions
How to perform tasks and other information
Troubleshooting Tools
Remote Services
Downloads
Info on Websites and/or Businesses
Contact
I have put this website up for your convenience. The website and email service is free, but if you find this site helpful and would like to make a donation, click on the donate button above. Thank you!

Using a USB flash drive

If you have a USB drive and need to know how to use it. This page will help. Below is links to further help you with various steps.

To use the USB drive, you plug it into an available USB port
To send files to the drive, You can do one of the following
1. Right-click the file, and click Send To
  1. Click the drive letter for the USB drive
2. Open up Windows Explorer and copy the file or files to the drive
3. In the program, you can click Save as and choose the flash drive to save it to.
When your finished with the drive
1. Click the safe to remove icon.

The safe to remove icon is located by the windows clock

If you get a message stating the drive will function faster, that is not an issue. it is just letting you know that it has the capability to function faster if the port you plugged the device into was a 2.0 device.

Contact Email: Support@upgradenrepair.com

DISCLAIMER:UpgradeNRepair (UNR), the owner, and any representatives of UpgradeNRepair (UNR) is not liable for any data loss or hardware failure because of the following procedure. The Information provided is a guide to assist the customer with an issue with their system or software. The procedures offered here may or may not harm your files. Even procedures that are not designed to harm files, can harm files, depending on the issue with the system. Because there is too many unknowns, UpgradeNRepair is unable to guarantee the safety of the files. Customer is responsible for their data and their actions. Before following the directions on this page and the pages these links are linked to, any data the customer does not want to lose will have to be saved. Saving the data is the sole responsibility of the customer. Some or all of the following procedures or information may not apply to your situation.