Upgrade the firmware

To upgrade the firmware on your router, follow these steps (Click on the hyperlink for instructions for that step)

NOTE: This is for the model WRT310N. The location may be different for other routers but the process should be similar

WARNING!!!

Make sure you are using the correct firmware for the model that you have. Also do not turn off or stop the upgrade once it starts!!!

Log on to the router
Click Administration

Click Firmware Upgrade

Click Browse

Select the file you downloaded
Click Start to Upgrade

WARNING!!!

Make sure you are using the correct firmware for the model that you have. Also do not turn off or stop the upgrade once it starts!!!

Contact Email: Support@upgradenrepair.com

DISCLAIMER:UpgradeNRepair (UNR), the owner, and any representatives of UpgradeNRepair (UNR) is not liable for any data loss or hardware failure because of the following procedure. The Information provided is a guide to assist the customer with an issue with their system or software. The procedures offered here may or may not harm your files. Even procedures that are not designed to harm files, can harm files, depending on the issue with the system. Because there is too many unknowns, UpgradeNRepair is unable to guarantee the safety of the files. Customer is responsible for their data and their actions. Before following the directions on this page and the pages these links are linked to, any data the customer does not want to lose will have to be saved. Saving the data is the sole responsibility of the customer. Some or all of the following procedures or information may not apply to your situation.