Service Status

Windows 8

If you have a device that is not responding, the service for that device may not be running.

For instructions on how to access Services, click here

In this example we are going to use Print Spooler to demonstrate

Double-click Print Spooler

On the Service status, it will show if the service is running or if it is stopped

If it is stopped and you want it to run, click Start

If it is running and you want it to stop, click Stop

When you are done with the setting, click Apply

Click OK

If you are having an issue with a device, check the status of that device. Below is things to check to make sure the service is setup correctly. Click the link for more information.

Contact Email: Support@upgradenrepair.com

DISCLAIMER:UpgradeNRepair (UNR), the owner, and any representatives of UpgradeNRepair (UNR) is not liable for any data loss or hardware failure because of the following procedure. The Information provided is a guide to assist the customer with an issue with their system or software. The procedures offered here may or may not harm your files. Even procedures that are not designed to harm files, can harm files, depending on the issue with the system. Because there is too many unknowns, UpgradeNRepair is unable to guarantee the safety of the files. Customer is responsible for their data and their actions. Before following the directions on this page and the pages these links are linked to, any data the customer does not want to lose will have to be saved. Saving the data is the sole responsibility of the customer. Some or all of the following procedures or information may not apply to your situation.