Boot to SafeMode with MSCONFIG

Boot to Safe Mode with MSCONFIG

Windows 8

To enable Safe Mode, Do the following

Open MSCONFIG
Click the Boot tab

Put a check on Safe boot

Minimal should be selected but if not then select it

Click Apply

Click OK

Click Restart (if you want to reboot now. If you want to reboot later then click Exit without restart)

Click here for a list of different methods to access Safe Mode

Contact Email: Support@upgradenrepair.com

DISCLAIMER:UpgradeNRepair (UNR), the owner, and any representatives of UpgradeNRepair (UNR) is not liable for any data loss or hardware failure because of the following procedure. The Information provided is a guide to assist the customer with an issue with their system or software. The procedures offered here may or may not harm your files. Even procedures that are not designed to harm files, can harm files, depending on the issue with the system. Because there is too many unknowns, UpgradeNRepair is unable to guarantee the safety of the files. Customer is responsible for their data and their actions. Before following the directions on this page and the pages these links are linked to, any data the customer does not want to lose will have to be saved. Saving the data is the sole responsibility of the customer. Some or all of the following procedures or information may not apply to your situation.