Access Date and Time

Choose the method you want to Date and Time

Via Control Panel
Via Search
Via Clock

Access Date and Time via Control Panel

If you have high speed internet, you can watch the video. If you have dial-up, I recommend skipping the video and click here to follow the steps

Follow these instructions.

Go to Control Panel (This link will open in a different window)
Double-click Date and Time

Access Date and Time via Search

If you have high speed internet, you can watch the video. If you have dial-up, I recommend skipping the video and click here to follow the steps

Follow these instructions..

Access Run or Search window
Type Date and Time
Click OK

Access Date and Time via Clock

If you have high speed internet, you can watch the video. If you have dial-up, I recommend skipping the video and click here to follow the steps

Follow these instructions...

Click Clock

Click Change date and time Settings...

Contact Email: Support@upgradenrepair.com

DISCLAIMER:UpgradeNRepair (UNR), the owner, and any representatives of UpgradeNRepair (UNR) is not liable for any data loss or hardware failure because of the following procedure. The Information provided is a guide to assist the customer with an issue with their system or software. The procedures offered here may or may not harm your files. Even procedures that are not designed to harm files, can harm files, depending on the issue with the system. Because there is too many unknowns, UpgradeNRepair is unable to guarantee the safety of the files. Customer is responsible for their data and their actions. Before following the directions on this page and the pages these links are linked to, any data the customer does not want to lose will have to be saved. Saving the data is the sole responsibility of the customer. Some or all of the following procedures or information may not apply to your situation.