How to access Default Programs

Choose the method you want to Default Programs

Via Control Panel
Via Search

Access Default Programs via Control Panel

If you have high speed internet, you can watch the video. If you have dial-up, I recommend skipping the video and click here to follow the steps

Follow these instructions.

Go to Control Panel (This link will open in a different window)
Double-click Default Programs

Access Default Programs via Search

If you have high speed internet, you can watch the video. If you have dial-up, I recommend skipping the video and click here to follow the steps

Follow these instructions..

Access Run or Search window
Type Default Programs
Click OK

Contact Email: Support@upgradenrepair.com

DISCLAIMER:UpgradeNRepair (UNR), the owner, and any representatives of UpgradeNRepair (UNR) is not liable for any data loss or hardware failure because of the following procedure. The Information provided is a guide to assist the customer with an issue with their system or software. The procedures offered here may or may not harm your files. Even procedures that are not designed to harm files, can harm files, depending on the issue with the system. Because there is too many unknowns, UpgradeNRepair is unable to guarantee the safety of the files. Customer is responsible for their data and their actions. Before following the directions on this page and the pages these links are linked to, any data the customer does not want to lose will have to be saved. Saving the data is the sole responsibility of the customer. Some or all of the following procedures or information may not apply to your situation.