Select Disk

DiskPart

This is from Microsoft Technet. If you want to see it at their site, click here

syntax: select disk=[n]

Selects the specified disk and shifts the focus to it.

Specifies the disk number of the disk to receive focus. If you do not specify a disk number, the select command lists the disk that currently has the focus. You can view the numbers for all disks on the computer by using the list disk command.

Contact Email: Support@upgradenrepair.com

DISCLAIMER:UpgradeNRepair (UNR), the owner, and any representatives of UpgradeNRepair (UNR) is not liable for any data loss or hardware failure because of the following procedure. The Information provided is a guide to assist the customer with an issue with their system or software. The procedures offered here may or may not harm your files. Even procedures that are not designed to harm files, can harm files, depending on the issue with the system. Because there is too many unknowns, UpgradeNRepair is unable to guarantee the safety of the files. Customer is responsible for their data and their actions. Before following the directions on this page and the pages these links are linked to, any data the customer does not want to lose will have to be saved. Saving the data is the sole responsibility of the customer. Some or all of the following procedures or information may not apply to your situation.