Linksys Router

To upgrade the firmware of the router, do the following (click the hyperlink for instructions on that step)

NOTE: The steps below may be different depending on the type of router you are using. However, these steps should be similar enough to apply to other routers. If you need to know the router number, click here.

You will need to Get the gateway address
You will need to Log on to the wireless router
You will need to know the firmware version
Check the Linksys website to see if they have a newer version of the firmware. If they do, you will need to download the firmware
You will need to upgrade the firmware version
Restart the router

Contact Email: Support@upgradenrepair.com

DISCLAIMER:UpgradeNRepair (UNR), the owner, and any representatives of UpgradeNRepair (UNR) is not liable for any data loss or hardware failure because of the following procedure. The Information provided is a guide to assist the customer with an issue with their system or software. The procedures offered here may or may not harm your files. Even procedures that are not designed to harm files, can harm files, depending on the issue with the system. Because there is too many unknowns, UpgradeNRepair is unable to guarantee the safety of the files. Customer is responsible for their data and their actions. Before following the directions on this page and the pages these links are linked to, any data the customer does not want to lose will have to be saved. Saving the data is the sole responsibility of the customer. Some or all of the following procedures or information may not apply to your situation.